AGA marvel ML15WSF3 Series, Installation, Operation And Maintenance Instructions

Page: 23 / 93

23
OVERLAY DOOR PANEL INSTALLATION AND SHELVING
CONFIGURATIONS
Step 5: Install the door
Carefully open the top and bottom hinges on the door
being careful as there are many pinch points. Place the
hinges over the 4 screws in the cabinet, 2 at the top and 2
at the bottom and slide the door into position. Tighten the 4
hinge screws with a phillips screwdriver. (See Figure 13
and Figure 13a). Place wire harness from the grille and
mount to the bottom of the door with the screw and "P"
clamp removed in step 1. (See Figure 13b). Reconnect the
wire harness, (See Figure 14).
Step 6: Secure the cabinet
Use the #8 x
3
⁄
4
" black screws from the literature pack to
secure the counter top to the cabinet top through the holes
in the cabinet "Z" bracket.
Loading Tips and Suggestions
Your appliance is equipped with a rollout shelf system
which provides maximum access and visibility for the
product stored on the shelving arrangements listed below.