AGA marvel ML15WSF3 Series, Installation, Operation And Maintenance Instructions

Page: 14 / 93

USING YOUR ELECTRONIC CONTROL
14
If the control lock is active (illuminated lock icon) the control
will have to be unlocked before using the keypad to reset
an alarm condition. See page 12 (Control Lock) for
instructions for unlocking the control.
Temperature Sensor Error Codes
The temperature sensors are monitored continuously. Any
OPEN or SHORTED circuit condition will initiate an
ERROR CODE as listed below:
Single Zone Models:
Alarms (Single and Dual Zone):
The control will alert you to conditions that could adversely
affect the performance of the appliance.
• Door ajar -
If the door is open, or not closed
properly, for more than 5-minutes the System Status
OK indicator will turn-off, the "Door Ajar" indicator will
flash, and a tone will sound every 60 seconds.
Additionally, an "ALARM RESET" indicator will be
displayed below the "On/Off" keypad.
The audible alarm can be muted, for each occurrence,
by pressing the lock keypad.
This alarm condition can be reset by closing the door
or momentarily pressing the "On/Off" keypad, (i.e.-if
you are cleaning the storage compartment, etc.). The
alarm will recur in 5-minutes if the alarm condition
persists.
Temperature Sensor Error Codes
Sensor Displayed Code Error Description Action to Take
Single Zone
Temperature Sensor
Failed temperature sensor in the single
zone compartment. Can lead to
unwanted wine storage temperatures.
Call service to have the
temperature sensor replaced.
Defrost Sensor
Failed defrost temperature sensor.
Causes unit to not defrost properly and
can create large frost build-up. Can lead
to water damage to the unit and
surrounding floor.
Unplug the power cord
immediately and call service to
have the defrost sensor
replaced.
Dual Zone Models:
NOTE
Door Ajar
ALARM RESET
NOTE