6
·
Connecting to a Macintosh or compatible computer
·
Connecting to a video equipment with S-Video connector
(Optional)
·
Connecting to a video equipment with CVBS jack
(Optional)
Step 3: With the monitor turned off, connect the monitor end power plug of adaptor to
the power jack of the monitor. Then connect the power cord to the adapter and
the power plug to the power source.
Step 4: Turn on your computer or video equipment. Press
power switch to turn on
monitor.
Step 5: For 15” LCD monitor, it will have the best performance at resolution 1024 x 768.
Ensure that your computer display is set at 1024 x 768 pixels and 60Hz. Press the
AUTO button. The monitor will optimizes the display automatically.(If the monitor
is connected to a video equipment such as DVD or VCR player, please skip this
step.)
2.4 Setting the input signal priority
This monitor will detect the video input source (VGA-In or VIDEO-In) automatically.
You may switch the input signal priority if both inputs are connected. Please refer to
“Customizing Monitor” section for details.
2.5 Install information(.inf) file for Microsoft Windows 95/98/2000/ME/XP
The information file (also known as driver) for Microsoft Windows
95/98/2000/ME/XP is available in the enclosed floppy disk or CD-ROM. You may
install the enclosed driver for better communication between the monitor and
Windows 95/98/2000/ME/XP. The installation details can be found in the driver disk.
Summary of Contents for X-150
Page 1: ...0 ...
