![AG Neovo X-150 User Manual Download Page 20](http://html.mh-extra.com/html/ag-neovo/x-150/x-150_user-manual_2865479020.webp)
19
·
Check that the power cord is properly connected to the
power adapter.
·
Check the power cord if it is properly connected to power
outlet.
·
If there is electrical power coming from the power
outlet. Use another device to check for power.
·
No picture
·
The LED power
indicator is orange
color
·
Ensure the computer is not in the power saving mode.
(Move the mouse or press a key on the keyboard to wake
up the computer.)
·
Check the power switch of your computer or video
equipment if it is in the “ON” position.
·
Check the video signal cable if it is properly connected.
·
The texts are not solid
·
Change the resolution of the video signal to 1024 by 768
if it is not.
·
Press
button to run the automatic adjustment.
·
Adjust Clock and Phase in the OSD menu to fine tune.
(Please refer to the “Customizing Your Monitor” section
of this user manual for details.)
·
Adjust Sharpness in the OSD menu if you are not in 1024
by 768 resolution. (Please refer to the “Customizing Your
Monitor” section of this user manual for details.)
·
Screen image is not
Centered properly
·
Some lines missing
·
Press
button to run the automatic adjustment.
·
Adjust H. Position and V. Position to fine tune. (Please
refer to the “Customizing Your Monitor” section of this
user manual for details.)
·
There are red, green,
blue or black tiny dots
on the screen.
·
The TFT LCD panel is made of millions of small
transistors. And each defect transistor will cause a
missing red, green, or blue dot.
·
According to the industrial standard, 5 missing dots are
acceptable for a A-grade monitor. This LCD monitor
meets the standard.
·
Moisture between the
glass and screen
·
Some reasons might cause moisture between the glass
and screen, such as the humidity, bad delivery, bad
storage condition or leaving it without use for a long
time, however, please rest assured that the monitor
won’t be damaged or effected by those factors. What you
need is to get a hair dryer to dry the moisture out with a
cloth covered the surface of the glass.
Summary of Contents for X-150
Page 1: ...0 ...