11
3.1.7 Setting input signal priority (TO VIDEO-IN)
This monitor will detect the video input source (VGA-In or VIDEO-IN) automatically.
You may switch the input signal priority if both inputs are connected.
1.
Press any one of
button to activate OSD menu.
2. Press or
button to select To VIDEO-IN, and press
or
button
to switch the input signal priority to VIDEO IN. (If there are no signal input from
VIDEO-IN connector, the input signal priority will switch back to VGA-IN
automatically.)
3.
To close the OSD menu, press
or
button to select
(Save & Exit),
and press
or
button.
Note: You may also press
to exit OSD menu but without saving.
3.1.8 Adjusting OSD menu parameters (OSD Position and OSD Timer)
The settings allow you to change the OSD menu position and the duration of OSD
menu count start from the last input.
1.
Press any one of
button to activate OSD menu.
2. Press or
button to select
(Next Page), and press
or
button for the second page.
3. Press or
button to select
(Next Page), and press
or
button for the third page.
4. Press or
button to select (OSD Timer), and press
or
button to select between 10, 15, 20, 25, 30 seconds.
Summary of Contents for X-150
Page 1: ...0 ...
