The OSD (On-Screen Display) menu
41
Control
Setting
•
RS-232C
/
LAN
: Sets a terminal to control the display.
•
IR Passthrough
: Select it when multiple displays are connected via
RS-232C cables.
-
Primary
: Designate the display as the primary unit for remote
control operation. Only this display will be operated by the remote
control.
-
Secondary
: Designate the display as the secondary unit. The
display can not be operated by the remote control, and will only
receive the control signal from the primary display via the RS-232
connection.
Network
Settings
"Network connection" on page 31
for details.
Set Monitor
ID
Assigns an ID number for the current display when multiple displays are
connected.
For use when under the RS-232C control mode.
HDMI
Control
Uses the HDMI CEC (Consumer Electronics Control) industry standard
protocol to share functionality between connected devices and the
display. To transfer system commands, you need to use an HDMI cable
to connect the display to a device equipped with HDMI CEC. Select
On
in
this menu and you can operate the main functionalities on your display
and the connected device with one remote control.
