Setting up the display
9
Setting up the display
Mounting the display
You can install the display on a vertical surface with a suitable wall mounting
bracket or on a horizontal surface with the optional desktop stands. Please pay
attention to the following notes during installation:
• This display should be installed by at least two adult persons. Attempting to
install this display by only one person may result in danger and injuries.
• Refer the installation to qualified technicians. Improper installation may cause
the display to fall or malfunction.
Installing the display on a wall
1. Place a clean, dry and lint-free cloth on a flat, horizontal and object-free sur-
face. Make sure that the size of the cloth is larger than the display.
2. Gently lay the display on the cloth with the LCD screen facing down.
3. Remove the desktop stands from the display if installed.
4. Identify the wall mounting
screw holes on the back of
the display as shown in the
illustration.
5. Install the wall mounting
bracket on the display and
attach the display to the wall
according to the mounting
bracket’s instructions. The
length of the screw should
exceed the thickness of the
wall mounting bracket by at
least 10 mm. Make sure that
all screws are tightened and
secured properly.
(Recommended torque: 470 -
635N•cm). The mounting
means should be strong
enough to bear the weight of
the display.
*Screw type: M8
400 mm
400 mm
Thickness of the
wall mounting
bracket
10 mm
(0.39")
LCD display
