16
3. Ensure that the main gear race has properly
engaged the three rollers before closing latch.
4. Rotate the MDU-G4 manually to ensure
smooth rolling operation.
U
NIVERSAL
B
RACKET
I
NSTALLATION
The universal anti-rotation bracket is provided with the OnTrac3 kit. It should be used for vehicles that
are not supported with a custom vehicle-specific bracket. Consult your OnTrac3 dealer for a list of all
available anti-rotation brackets. An Anti-rotation bracket is required to complete the MDU-G4 installation.
Note:
A different bracket may be required depending on your specific vehicle. Contact your
AutoSteer dealer for details
Note:
If you are installing a vehicle specific anti-rotation bracket, skip this section and refer to the
instruction manual provided with your vehicle specific anti-rotation bracket kit.
U
NIVERSAL
B
RACKET
I
NSTALLATION
K
IT
O
VERVIEW
To complete your MDU-G4 installation and prevent the rotation of the MDU-G4, an anti-rotation bracket
must be mounted to the vehicle steering column just below the steering wheel. This chapter provides
instructions for installing a universal bracket kit that is available as an accessory through your dealer.
The typical universal bracket kit includes the following components: