12
Install Spacer (If Needed)
Install the spacer around the steering column
between the steering wheel and the main gear. Flex
the plastic spacer as needed to clear the steering
wheel spokes. The large chamfer on the outside
diameter of the spacer ring should be facing the main
gear..
Note:
Two spacers with different thicknesses are included in the kit. Select the thinnest spacer that
provides the sufficient clearance between the steering wheel and the MDU-G4
Install the Top Ring
1. The gear is free to move around and must be now clamped to the steering wheel. This procedure will
install and center the ring gear for typical 3 spoke shaped steering wheels.
2. Place the top ring on top of the steering wheel and install a minimum of 6 hex screws. Install a screw
on each side of every spoke keeping the screws as close to the spokes as possible. At this stage keep
the screws fairly loose to allow for centering.
Note:
Two lengths of screws are provided in the kit to support different thicknesses of the steering
wheel spokes. Select the shorter of the two screws that still provides full thread engagement.