©Copyright Lotronic 2018
5
PIXSTRIP40
When hanging multiple products vertically, attach the safety cable from the
bracket of the previous product to the safety loop of the next product.
Never attach more than 3 items from the initial item when hanging vertically.
Power/Signal Connection Procedure
The unit uses an RJ45 connection to link all ports. Each unit can be linked from end-to-end never
exceeding a total of 16 strips for each daisy chain. The following diagram illustrates how to configure
the data connections.
Addressing of every output when using Art-Net™
When using Art-Net™, set the addressing for each of the 16 outputs of the strip controller, including
Net, Sub-net
and
Universe 1-4.
If you are using 16 items on a single output, the starting channel should remain at 1.
In the order of connection, outward from the controller, every unit will automatically have the
following Art-Net™ address: 1, 121, 241, 361.
