©Copyright Lotronic 2018
2
PIXSTRIP40
Contents of the carton:
•
PIXEL STRIP BAR WITH 40 RGB SMD LEDS
•
1x RJ45 lead
•
1x User manual
Unpacking Instructions
Immediately upon receiving a fixture, carefully unpack the carton, check the contents to ensure that
all parts are present and have been received in good condition. Notify the freight company
immediately and retain packing material for inspection if any parts appear to be damaged from
shipping or the carton itself shows signs of mishandling. Keep the carton and all packing materials. In
the event that a fixture must be returned to the factory, it is important that the fixture be returned in
the original factory box and packing.
Safety Instructions
Please read these instructions carefully, they include important information about the installation,
usage and maintenance of this product.
• Please keep this User Guide for future reference. If you sell the unit to another user, be sure that
he also receives this instruction booklet.
• This product is intended for indoor use only!
• Always connect the product to a grounded circuit to avoid electrocution.
• To prevent risk of fire or shock, do not expose fixture to rain or moisture. Make sure there are no
flammable materials close to the unit while operating.
• The unit must be installed in a location with adequate ventilation, at least 1m from adjacent
surfaces. Be sure that no ventilation slots are blocked.
• Let the device cool down for 10 minutes prior to servicing it.
• Don't touch the housing during operation as it may be very hot.
• Maximum ambient temperature (Ta) is 104° F (40°C). Do not operate the fixture at temperatures
higher than this.
• In the event of a serious operating problem, stop using the unit immediately. Never try to repair
the unit by yourself. Repairs carried out by unskilled people can lead to damage or malfunction.
Please contact the nearest authorized technical assistance center. Always use the same type of spare
parts.
• Avoid direct eye exposure to the light source while it is on.
Features
PIXSTRIP40 is a linear video fixture for the rental market or fixed installation in clubs, bars and small
stages. The effect is particularly impressive when several units work together to create multiple
configurations in any orientation.
•
Almost effortless pixel mapping to configure images and effects
•
Up to 16 pcs PIXSTRIP40 can be used with the PIXSTRIP-C
•
Easy daisy chain linking by RJ45
•
Impressive built-in effects or controlled via DMX / Artnet / Klingnet
•
Requires the control unit PIXCOLOR-C
GB
