Safety
TankControl 10
5
2
Safety
2.1
Intended use
The hydrostatic level indicator TankControl 10 may only be used to
measure the level of low-viscosity, non-adhesive liquids:
•
Fuel oil EL as per DIN 51603-1
•
Fuel oil L as per DIN 51603-2
•
Diesel fuel as per EN 590
•
Water
•
Waste water
Any use other than the application explicitly permitted in this instruc-
tion manual is not permitted.
2.2
Predictable incorrect application
The hydrostatic level indicator TankControl 10 must never be used in
the following cases:
•
Hazardous area (Ex)
If the product is operated in hazardous areas, sparks may cause
deflagrations, fires or explosions.
•
Use as safety equipment
TankControl 10 does
not
replace the function of a level sensor
at the fuel oil tank.
•
Use as overfill prevention system
•
Level measurement in tanks containing blackwater
•
Use of the relays for safety-related purposes
2.3
Safe handling
This product represents state-of-the-art technology and is made ac-
cording to the pertinent safety regulations. Each product is subjected
to a function and safety test prior to shipping.
Operate the product only when it is in perfect condition. Always
observe the operating instructions, all pertinent local and na-
tional directives and guidelines as well as the applicable safety
regulations and directives concerning the prevention of acci-
dents.
Extreme environmental conditions have negative effects on the func-
tion of the product.
Protect TankControl 10 from shocks.
Only use the control unit indoors.
Protect the control unit from humidity.
