Mounting
TankControl 10
19
2.
Mount the control unit to the wall.
A 1
Mount the screw to the wall.
B
Drill the fixing holes in the bottom
part with a Ø 5 mm drill.
Mount the bottom part to the wall
with the screws shipped with the
unit.
2
Fit the control unit.
3
Fixate the control unit by screwing the
bottom lug to the wall.
3.
Mount the junction box for connecting the cable of the submers-
ible probe and the cable of the control unit at the desired posi-
tion.
4.
Route the cable of the control unit into the junction box.
5.
Push the cable gland required for the tank (cable gland kit or
mounting kit, see chapter 6.6, page 23) onto the cable of the
submersible probe; verify correct orientation.
