AFRISO PrimoTherm K 180-1, Operating Instructions Manual

Page: 60 / 135

25
Mounting
PrimoTherm®
EN
5.7.1 Mounting the product to a boiler manifold KSV
If you want to mount the product to the boiler manifold, use the screw con-
nector kit included in the scope of delivery.

Verify that you use the seals enclosed with the screw connector kit.
1. Remove the heat insulation (See "Parts of the heat insulation" on
page 9.)
2. Screw the reducers (grey)
to the product.
3. Tighten the screw connec-
tions.
4. Screw the product to the
boiler manifold KSV.
5. Tighten the union nut of
the boiler manifold KSV.
6. Screw the pipes of the
heating circuit to the
screw connections of the
product.