2
About these operating instructions
EN
PrimoTherm®
1
About these operating instructions
These operating instructions describe the heating pump assemblies Primo-
Therm® "180-1 DN 32" and "180-2 DN 32" (also referred to as "product" in
these operating instructions). These operating instructions are part of the
product.
•
You may only use the product if you have fully read and understood these
operating instructions.
•
Verify that these operating instructions are always accessible for any type
of work performed on or with the product.
•
Pass these operating instructions as well as all other product-related doc-
uments on to all owners of the product.
•
If you feel that these operating instructions contain errors, inconsisten-
cies, ambiguities or other issues, contact the manufacturer prior to using
the product.
These operating instructions are protected by copyright and may only be
used as provided for by the corresponding copyright legislation. We reserve
the right to modifications.
The manufacturer shall not be liable in any form whatsoever for direct or con-
sequential damage resulting from failure to observe these operating instruc-
tions or from failure to comply with directives, regulations and standards and
any other statutory requirements applicable at the installation site of the prod-
uct.
Summary of Contents for PrimoTherm K 180-1
