12
Operation
EN
KSG mini
6
Operation
For safety reasons, liquid must escape via the discharge line of the safety
valve during heating.
Verify that the safety valve is not shut off.
1. If the safety valve has responded, check the system.
2. Remove the cause before recommissioning the system.
3. Perform a function test of the safety valve (see chapter "Function test
7
Maintenance
7.1
Maintenance intervals
7.2
Maintenance activity
Replacing the quick air vent
Due to the integrated mounting valve, the quick air vent can be replaced while
the system is under pressure.
When
Activity
Every 6 months
Perform a function test of the safety valve (see
chapter "Function test safety valve").
WARNING
HOT LIQUID
Water in heating systems can have temperatures of more than 100 °C.
•
Verify that blown off liquid cannot cause injury or damage.
Failure to follow these instructions can result in death, serious injury or
equipment damage.
Summary of Contents for KSG mini
