AFRISO KSG mini, Mounting And Operating Instructions

Page: 30 / 93

13
Troubleshooting EN
KSG mini
8 Troubleshooting
Any malfunctions that cannot be removed by means of the measures
described in this chapter may only be repaired by the manufacturer.
9 Decommissioning, disposal
Dispose of the product in compliance with all applicable directives, standards
and safety regulations.
1. Dismount the product (see chapter "Mounting", reverse sequence of
steps).
2. Dispose of the product.
10 Returning the device
Get in touch with us before returning your product (service@afriso.de).
11 Warranty
See our terms and conditions at www.afriso.com or your purchase contract
for information on warranty.
Problem Possible reason Repair
Pointer of pressure
gauge below green
range System pressure too
low Fill liquid into the system
until the pointer of the
pressure gauge is in the
green range again
Pointer of the pressure
gauge again below
green range after filling
of the system Leak in system Verify tightness of the
system
Water escapes at safety
valve and pointer of
pressure gauge is below
green range Insufficient pressure in
expansion vessel or
expansion vessel is
defective Check expansion vessel
Other malfunctions - Contact the AFRISO
service hotline