12
Mounting
EN
DIT 10
5.1.3
Tank height (maximum liquid level)
1. Determine the tank height in mm (see the technical data of the tank).
Tank height:_______________________________ mm
5.1.4
Current liquid level
1. Determine the liquid level in mm (for example, use a dipstick to deter-
mine the liquid level).
Liquid level:________________________________ mm
5.2
Mounting the wall bracket
5.3
Mounting the moisture-proof junction box
Verify that the moisture-proof junction box is not used for outdoors.
Verify that the cable length is sufficient so that the control unit can be
removed from the wall bracket if you need to replace the battery.
1. Mount the moisture-proof junction box using the enclosed screws.
2. Fit the control unit into the wall bracket.
3. Route the cable (pressure sensor cable and cable of the control unit) into
the moisture-proof junction box.
4. Push the cable gland at the tank onto the cable of the pressure sensor.
1. Mount the wall bracket at a suita-
ble location using the enclosed
screws (4 x 30 mm).
Summary of Contents for DIT 10
