AFRISO DIM 20, Operating Instructions Manual

Page: 38 / 93

6
Information on safety
EN
DIM 20
2.5 Qualification of personnel
Only appropriately trained persons who are familiar with and understand the
contents of these operating instructions and all other pertinent product doc-
umentation are authorized to work on and with this product.
These persons must have sufficient technical training, knowledge and expe-
rience and be able to foresee and detect potential hazards that may be
caused by using the product
All persons working on and with the product must be fully familiar with all
directives, standards and safety regulations that must be observed for per-
forming such work.
2.6 Personal protective equipment.
Always wear the required personal protective equipment. When performing
work on and with the product, take into account that hazards may be present
at the installation site which do not directly result from the product itself.
2.7 Modifications to the product
Only perform work on and with the product which is explicitly described in
these operating instructions. Do not make any modifications to the product
which are not described in these operating instructions.
WARNING
ESCAPING MEDIUM
• Verify that you risk assessment includes all events and causes which may
provoke medium to escape.
• Verify that escaping medium can be safely collected and/or discharged.
• Verify that all pressurised parts and connections of the pressure gauge and
the measuring line are sealed and function correctly by using approved test
methods at regular intervals.
• Immediately replace damaged pressure gauges.
Failure to follow these instructions can result in death, serious injury or
equipment damage.