21
Operation
EN
DIM 20
7.4.3
Menu 3:
DECIMA
(position of decimal point)
1. Display the menu item
DECIMA
.
2. Press the OK key.
-
DECIMA
starts to flash.
3. Use the arrow keys to adjust the required position of the decimal point.
4. Press the OK key to confirm the setting.
The number of decimal points is limited depending on the pressure range
and the selected unit.
7.4.4
Menu 4:
UNIT
(pressure unit)
1. Display the menu item
UNIT
.
2. Press the OK key.
- The currently selected unit starts to flash.
3. Select the required unit using the arrow keys:
- bar
- mbar
- PSI
- InHg
- cmHg
- mmHg
- hPa
- kPa
- MPa
- mWC
4. Press the OK key to confirm the setting.
If you change a unit, you may have to modify the decimal point as well so
that the pressure can be displayed correctly. Depending on the pressure
range, you may not be able to use all pressure units.
Summary of Contents for DIM 20
