Operation
20
DIT 01
the tank is completely full. At levels of less than 50 %, a correction o
the value indicated is not meaningful. In order to correct the curren
filling level, you can overwrite the displayed value.
f
t
ined filling
the range from 0 to 9.
ank data are entered and the digital unit switches to
mal measuring mode.
e
symbol in the top left corner of the display is no longer
7 O
7.1
Swi
on the display of the digital unit. The
-
battery is not used. By pressing the F key again,
7.2
display
play points to m³.
•
.
at the bottom of the display points to %.
7.3
---“. Only the current fill-
Hold down the
and
keys simultaneously for three seconds
to activate the "Enter tank data" mode.
1.
Use the
and
keys to set the previously determ
level. Press
to select the digit to be modified. Press
to
change the selected digit in
2.
Press the F key to confirm the filling level setting.
All required t
nor
Th
shown.
peration
tching on and off
Press the F key to switch
digital unit is automatically switched off approx. 2.5 minutes af
ter you press a key.
The display shows OFF.
In this mode, the
you reactivate the tank contents indicator for another 2.5 minutes
and the current filling level is displayed.
Display formats
Press the F key several times to select one of the four
formats for the filling level:
•
Displaying the volume in litres.
The arrow at the bottom of the display points to litres.
•
Displaying the volume in m³.
The arrow at the bottom of the dis
Displaying the volume in percent of the total contents
The arrow
•
Displaying the filling level in mm.
The arrow at the bottom of the display points to FH.
Correct tank data
If the measured value exceeds the tank entered data (e.g. because
you entered incorrect tank data), the display will blink. The display
will toggle between the indicated value and “-
ing height in mm will be displayed permanently.