Mounting
and
commissioning
DIT 01
19
display show the tank shape code 0. The 0 indicates that no
tank shape code has yet been selected.
1.
Use the
and
keys to set the previously determined tank
shape code (see chapter 6.1, page 12).
F key to confirm the tank shape setting and continue
e of the tank facility. Press
to select the digit to be
a
F key to confirm the volume setting and continue with
e bottom of the display points to the unit Per-
. If
digit to be modified. Press
to
ted digit in the range from 0 to 9.
cy is obtained if
21. Press the
with the tank volume data.
Tank volume
The arrow at the bottom of the display points to the unit m³.
The display shows the currently selected tank volume. If the
display shows 0000 this means that no tank volume has yet
been entered.
1.
Use the
and
keys to set the previously determined total
volum
modified. Press
to change the selected digit in the range from
0 to 9 Volumes of up to 9999 litres are entered without a comm
digit.
2.
Volumes greater than 9999 litres are entered as cubic- metres
(1000 litres = 1 cubicmetre) with a comma digit. Press
to
move the comma digit.
3.
Press the
the tank height data.
Tank height
The arrow at th
centage. The display shows the currently selected tank height
the display shows 0000 this means that no tank height has yet
been entered.
1.
Use the
and
keys to set the previously determined tank
height. Press
to select the
change the selec
2.
Press the F key to confirm the volume setting and continue with
the current filling level data.
Current filling level
The arrow at the bottom of the display points to the unit Filling
Level (FH). The display shows the filling level currently meas-
ured by the probe.
If you measure heating oil, the reading should be pretty close to the
actual filling level. If you need a greater accuracy, enter the previ-
ously determined filling level. Please note: the fuller the heating oil
tank, the greater the accuracy. The maximum accura