Mounting and commissioning
6
Mounting and commissioning
6.1
Tank data determination
Before the DIT 01 tank contents indicator is installed, you must de-
termine the appropriate tank data. Please document the tank data on
this page for safety reasons and to allow for subsequent checks.
Tank shape
Refer to the table below to find the appropriate code for the tank
shape. If you want a linear indication, use the code 1.
Tank shape
code
Tank shape
Description
1
Linear tank
Rectangular tanks, upright, cylin-
ders, steel tanks welded in base
ments, all other linear measuring
applications.
2
Tubular tank
Vertical cylinder
3
Ball-shaped tank Ball-shaped tank
4
Plastic battery
tank
Plastic battery tanks with armour-
ing or arches
5
Oval tank
Oval basement tanks, e.g glass-
fibre reinforced tanksor steel
sheet tanks
6
Plastic tank with
recess
Plastic tanks with major recess
major in the centre (manufactur-
ers: e.g. Roth, Werit)
Determined tank shape code:
Tank volume
Determine the total volume of the tank facility in litres.
Determined tank volume:
litres
Tank height (max. filling level)
Determine the tank height in mm.
Determined tank height:
mm
Current filling level
Determine the current filling level as exactly as possible in mm.
Determined filling level:
mm
12
DIT 01