24
RS485 Setting
485 address shows communication address and baud rate. Press ENT to enter communication address
setting interface; press UP and DOWN to change values; Press ENT to confirm.
SN
It shows inverter’s serial number.
SetPowerCtrl
This item is for setting grid-connecting power limitation. Press ENT to enter control selection interface.
Press UP and DOWN to choose start-up or use forbidden, then press ENT to confirm; Press ENT to enter
power limitation setting interface. Press UP and DOWN to set limitation value, then press ENT to confirm.
7.4.4 LCD Backlight Control
The backlight of LCD will automatically turn off after 5 minutes, and LCD will automatically turn off after
10 minutes to electricity-saving mode. Press any key to turn on the LCD.
8 Technical Data
PV modules connecting to inverter should comply with the requirement of IEC61730 class A, and PV arrays
are not earthed.
Electrical Specifications
BNT012KTL
BNT013KTL
BNT015KTL
Input (DC)
