Afore AF1.5K-SL-1 Installation And Operation Manual Download Page 49

Page: 49 / 51

Maintenance&Trouble Shooting

Communication between

master inverter and slaver

ones abnormal in parallel

mode

Type of Fault Code

Name

Description

Recommend Solution

Outside

Warnning

• The warnings are not matter influence.

• Power off, then restart (Ref. Chapter8).

• If those faults occurs continuously and

frequently, please ask help for local

distributors.

• Check the smart meter model,

connection or connectors are correct,

any loose.

• if abnormal, repair or change.

• Power off, then restart (Ref. Chapter8).

• If those faults occurs continuously and

frequently, please ask help for local

distributors.

• Check Meter/CT connection, installed

place, and installed direction.

• if abnormal, re-installation.

• Power off, then restart (Ref. Chapter8).

• If this those faults continuously and

frequently, please ask help for local

distributors.

• Power off, then restart (Ref. Chapter8).

• If this those faults continuously and

frequently, please ask help for local

distributors.

I04

EnvirTempAdChan-

Warning

I07

I08

ExtFlashComWarning

EepromComWarning

Flash abnormal

Eeprom abnormal

I10

I11

HmiComWarning

FreqCalcConflictWarning

HMI abnormal

Frequency value abnormal

I05

CoolingTempAdChan-

Warning

Some temperature sensors

abnormal

Communication between

slaver CPU and master

CPU abnormal

I06

Temp3AdChanWarning

I09

SlaveComWarning

I12

UnsetModel

Running model is not initial

J01

MeterComWarning

Meter/CT abnormal

J02

MeterConnectWarning Wires connecting type of

meter wrong

• Check earth line connection or earth

connecting impedance.

• if abnormal, then adjust it.

• Power off, then restart (Ref. Chapter8).

• If this those faults continuously and

frequently, please ask help for local

distributors.

• Check parallel connect communi-

cation wires damage, connectors loose,

connect port correct or not.

• if not, then adjust it.

• Power off, then restart (Ref. Chapter8).

• If this those faults continuously and

frequently, please ask help for local

distributors.

J04

GndAbnormalWarning Earth impedance over by

cable loose and so on

J05

ParallelComWarning

• Contact with Battery manufacturer.

J03

SohWarning

Battery SOH low

• Contact with local distributor.

Inner Warnning

Summary of Contents for AF1.5K-SL-1




















































Search results

Summary of Contents for AF1.5K-SL-1

Reviews:

Related manuals for AF1.5K-SL-1

Brands by name

Popular brands

Afore AF1.5K-SL-1, Installation And Operation Manual

Search results

Summary of Contents for AF1.5K-SL-1

Reviews:

Related manuals for AF1.5K-SL-1

Brands by name

Popular brands