14
Pass/Fail Results Table
Port 1 Functionality
Note:
“Setting Pass/Fail Criteria” on page 18
for details on how to select and/or edit
pass/fail analysis rules .
#
Description
1 . Screen Title: displays File Name (e .g . COO1-003) if saved image is shown or Captured @ hh:mm:ss
if unsaved image is shown .
2 . Pass/Fail Indication: shown only if Pass/Fail option is enabled in Settings .
3 . Display Tabs with the Pass/Fail display tab selected .
4 . Analysis Rule applied to determine Pass/Fail .
5 . Analysis Zones: A - core, B - cladding, C - adhesive, D - contact area .
6 . Scratch analysis results for each zone:
•
Reports the number of detected scratches exceeding limit for each region
•
Highlights failed rules in RED
7 . Defect analysis results for each zone:
•
Reports the number of detected defects exceeding limit for each region
•
Highlights failed rules in RED
8 . Back soft key: press to return to previous screen .
9 . Menu soft key: press to display the Save/Send Menu .
1
2
3
4
5
6
7
8
9
2
1
5
8
9
3
4
7
6