Affirmative YEStablet 7375, User Manual

Page: 92 / 110

YES
tablet
7375 User Guide
Assembly Notes:
The Mountable Cradle may be bundled with a set of lower extension brackets to offer added elegance and
convenience in the deployment of the 7375. Its use is optional. This kit comprises front (A) and rear (B) brackets
with matching screws provided.
(A) (B)
The assembly process is as follows:
1.
Connect the applicable cables to the ports on the cradle bottom;
2. Attach front bracket (A) to the cradle body – flat surface facing front and
screw holes aligned; cables routed within – and secure with 2 screws provided;
3. NOTE: you may store the AC-DC adapter in the front bracket cavity if you
choose (this space may not be large enough for other adapters in general, say,
DC-DC);
4. NOTE: for wall mounting, the rear bracket (B) is unnecessary; you may stop
here and secure the assembly to the wall through the 4-6 openings available
(screws not provided);
5. To mount the rear bracket, first remove and save the lower row of (2) screws
from the rear of the cradle body;
6. Slip the rear bracket partially over the rear with screw holes aligned with the
exposed holes from the previous step; make sure the cables stay properly
routed and the lower edge snaps into matching elements on the front bracket;
7. Re-secure the lower row of screws onto the main body with the rear bracket
now included.
8. The completed assembly is now ready for assembly onto any applicable VESA
arms.
Vehicle-Mount Stand
•
The vehicle-mount stand is designed for support only. No connectivity is offered through the stand itself, and
there is no provision for a locking device.
•
The height and orientation of the stand can be adjusted.
•
The standard cradle must be used with the stand to provide connectivity and proper
fit.
•
The tablet can be mounted either with or without the standard protective rubber
jacket.
80