Affirmative YEStablet 7375, User Manual

Page: 24 / 110

YES
tablet
7375 User Guide
Operating the 7375 together with Cradle
The 7375 is complemented by a desktop Cradle for support; pass-through charging; connection of selected USB
peripherals, and communication with a PC. On the cradle, you will find a DC-in jack for the AC-DC adapter and a
USB (Type B) port for a USB cable connection to PC or laptop. Please always seat the 7375 securely onto the
cradle and use the procedure cited in this section to activate and verify the connection between the tablet and the
cradle. The cradle may be deployed as a desktop, benchtop, or vehicle-mount accessory.
1.
You may charge the battery pack on the 7375 by connecting the
AC-DC adapter directly to the DC-in port on the 7375 or through
the DC-in port on the Cradle while the 7375 is docked on the
Cradle.
Desktop Cradle
DC-in Port and Cradle Connector
Tablet and Cradle
in Vehicle Mount
USB Slave (Type B) Port & Cradle Connector
2.
The USB Type B port on the cradle is used for connection between a desktop computer and the 7375 when the
tablet is docked on the Cradle. This connection may be used for software installation, software update, and
software development purposes, where applicable. The ActiveSync software also leverages this connection for
synchronization between a PC and the 7375.
NOTE:
You will need to engage a pre-programmed button (usually #6) on the front bezel (see Buttons definition)
to enable the USB Type B (Slave) port (e.g., ActiveSync operation) operation on the Cradle. Removing the unit
from this cradle or Suspending the unit is designed to cause the connection to be lost.
12