Affirmative YEStablet 7375 User Manual Download Page 88

Page: 88 / 110

YES

tablet

7375 User Guide

Attach the battery pack to the battery cradle (

Figure 4)

Figure 4:

Insertion of

7375

External Battery Pack.

The charging (Yellow) LED lights up if the battery pack is being recharged.

When charging is complete or if the battery pack is fully charged, the LED will show solid Green.

If the charging LED does not light up at all, the battery is bad. The battery warranty is ninety days.

Do not forget to replace the protective rubber patch after the battery pack has been removed.

NOTE:

The cradle and battery pack are designed to be held together with the cradle placed horizontally. When

the battery pack is seated on the cradle, do not orient the package in a non-horizontal position.

Summary of Contents for YEStablet 7375















































































































Search results

Summary of Contents for YEStablet 7375

Reviews:

Related manuals for YEStablet 7375

Brands by name

Popular brands

Affirmative YEStablet 7375, User Manual

Search results

Summary of Contents for YEStablet 7375

Reviews:

Related manuals for YEStablet 7375

Brands by name

Popular brands