![background image](http://html.mh-extra.com/html/afe-power/scorpion-79-21008l/scorpion-79-21008l_instruction-manual_2864098013.webp)
12
Note: Please read the instruction below prior to installation.
21.
Install one (1) supplied
cable clamp 5/16” (black) around the wiring for the 20” single row
LED light.
22.
Locate the drilled hole furthest to the passenger side. Install one (1) #10-
32 x 1/2” button
head screw (black) through the aFe Scorpion grille. Turn the aFe Scorpion grille around and
place the cable clamp installed in Step 26 onto the #10-
32 x 1/2” button head screw
(black).
Install one (1) #10-32 SS flange nut onto the #10-
32 x 1/2” button head screw (black) and
tighten.
Summary of Contents for SCORPION 79-21008L
