9
14.
Loosen the four (4) nuts and the four (4) factory studs that attach the active shutter grille to
the factory grille.
15.
Disconnect the five (5) clips connecting the active shutter grille to the factory grille.
16.
Remove the active grille shutters from the factory grille and set it to the side. Save for
reinstallation.
17.
The hardware in Step 14 needs to be completely removed from the active shutter grille and
discarded after the active shutter grille and the factory grille have been separated.
Summary of Contents for SCORPION 79-21008L
