3
Note: Before you begin, use “Painter’
s
Tape” to apply a protective guard around the work
areas (fender, bumper, valance, headlights and turn signals). This will help protect the paint
and finish of your vehicle.
1.
Disconnect the negative battery terminal.
2.
Locate the hood release latch handle. Remove the two (2) screws that attach the plastic
handle to the hood release mechanism. Save the removed parts and hardware for
reinstallation.
3.
Remove the ten (10) push pin retainers and remove the plastic radiator cover. Save the
removed parts and hardware for reinstallation.
Summary of Contents for SCORPION 79-21003L
