17
16.
Before installing the aFe Scorpion grille assembly, install the supplied power harness. The
red wire goes on the positive battery terminal (+) and the black wire goes on the negative
battery terminal (-). You will need to mount the switch inside the cab or to an available
prewired switch. Use the (15) supplied
8” cable ties to secure the wiring loom to the
vehicle.
Summary of Contents for SCORPION 79-21003L
