![background image](http://html1.mh-extra.com/html/afe-power/scorcher-blue-77-83043/scorcher-blue-77-83043_instruction-manual_2864091004.webp)
Page 4
Refer to Figure A for Step 1
Step 1:
Before installing your aFe POWER module, you will have to place your vehicle’s ECU in sleep
mode. In order to do this, you will need to do the following:
•
If the engine is cold: open the hood, close the doors, lock the car and wait 30 seconds.
•
If the engine is warm: open the hood, close the doors, lock the car and wait 20 minutes.
•
If the engine is warm and you can
’t wait 20 minutes: disconnect the battery.
Note: Do NOT open doors or start vehicle while one of the sensors is disconnected. This
could create a check engine light
Figure A
2
1
REMOVAL