Page 11
Refer to Figure H for Steps 15-17
Step 15: Locate the battery on the passenger side of the vehicle.
Step 16: Connect the black ground terminal cable of the aFe POWER module harness to the negative
battery terminal.
Step 17: Connect the red power terminal cable of the aFe POWER module harness to the positive battery
terminal.
If the vehicle needs to be jump-started, the module will have to be disconnected from the
harness, and the bypass plug installed in place of the module. This is to protect the Scorcher
Blue from any damage that may occur when jump-starting.
Figure H
REMOVAL
Power and Ground Cables Connection