![background image](http://html.mh-extra.com/html/afe-power/momentum-hd/momentum-hd_instruction-manual_2864087004.webp)
Refer to Figure A for steps 1-6
Step 1: Disconnect both batteries.
Step 2: Loosen the (2) Intake tube clamps using an 8mm nut driver.
Step 3: Disconnect the wire harness 1 from the Mass Air Flow (MAF) sensor.
Step 4: Disconnect the wire harness 2 from the filter minder.
Step 5: Remove the crank case breather hose clamp by prying it open with a screw driver or cutting it.
Then pull the crank case breather hose from the intake tube.
Step 6: Remove the factory intake tube out of the vehicle. Take the auxiliary air line out of the factory air
box. Remove the factory air box by pulling it firmly out of the factory grommets.
REMOVAL
Page 4
Figure A
1
2