8
–54
Software Manual EN
◼
SE-24
◼
01.06.2022
◼
V1.3
2 Safety instructions
CAUTION
The safety instructions in the operating manual must be
followed.
The operating manual is the main document and must be read
by all means before installation and start-up of all devices of the
SE-24 series independent of the respective model.
3 Introduction to afagTools
3.1 Overview of the tools and functions
The
afagTools
program provides a parameterization software that makes
commissioning of the SE-24 servo controller with the corresponding Afag module
easy and more convenient.
Commissioning is possible even when no higher
level controller (PLC) is connected.
The
afagTools
program is easy to operate
and enables a quick and comfortable commissioning. It contains the following tools:
❖
Status
Display of device information and actual values.
❖
CAN configuration
Setting of communication parameters and of the CAN node address.
❖
Profibus configuration
Setting of the Profibus slave address.
❖
Firmware update
Execution of the firmware update.
❖
Download of parameters
Loading of a configuration file.
❖
Manual operation
Commissioning functions for enable, referencing, Jog mode and approach and
saving of positions.
❖
Supported languages: English, German (in preparation: French, Italian, Spanish,
Polish).
