28
–54
Software Manual EN
◼
SE-24
◼
01.06.2022
◼
V1.3
5.5 Profibus configuration
The “PROFIBUS configuration” tool sets the PROFIBUS parameters of the device
(address).
Proceed as follows to set the Profibus-Slave address:
1.
Call up the “afagTools” parameterization program.
2. Select the
“PROFIBUS Config” tool:
3. Set the Profibus-Slave address in the following window and confirm with
“Set”:
4.
Important:
The address is only retrieved when the controller is restarted.
5.5.1 Profibus baud rate
The SE-24 servo controller automatically detects the baud rate of the Profibus
communication and supports speeds up to
max. 12Mbaud
.
