44
–50
Mounting Instructions EN
◼
SE-Power FS
◼
01.06.2022
◼
V4.4
7
Initial operation
7.1
General notes on connection
Since the laying of the connection cables is very important in terms of EMC,
make sure to comply with the previous chapter
DANGER!
2 Safety notes for electrical drives and controller
may result in property damage, person injury, electric shock or in extreme cases
in death.
All regulator parameters was saved on the corresponding Servo Controller by
Afag, there’s no further parameterization required.
If you have multiple controllers and axes in use, are they explicit identifiable by the labelling.
Figure 17:
Servo positioning controller: Labelling Order
Serial number of the
module
Name of the module
Firmware version
Controller type
Order number
