T-7
T-11
D-2
D-2
D-3
D-3
D-4
D-4
D-5
D-5
D-1
D-2
D-3
D-4
D-5
T-5
B-3
Drill pilot holes (1/2" bit) on cut line.
Warning:
Safety Glasses
recommended (T-12).
Place Top-mount Template (B-3) on
counter, cut along top-mount
installation line. Trace outside line
installation (as shown on template).
Prepare strainer for installation.
Loosen the Lock Nut, check to
ensure that all parts are complete.
Wipe any excess Plumber's Putty
away from top of the sink hole.
Place the Bottom Seal (D-4) on the
underside of the Strainer Bowl (D-2)
and tighten with Strainer Nut (D-5)
using Channel Lock Wrench (T-11).
Set the Strainer Bowl (D-2) and Top
Seal (D-3) into the hole from above
and push down firmly.
Apply a 1/4” bead of Plumber's
Putty (T-13) around the sink drain
hole as shown above.
Repeat for both sink holes.
18
16
17
15
14
13
8
