Dual Video in MCU
Dual Video functionality, based on H.239 standard, is available for multiconference calls, even in mixed mode (only SIP
participants will not see the dual stream).
To start a Dual Video session in a multiconference:
1. Start a multiconference (see the “How to Start a Multiconference” section)
2. Connect all desired terminals
3. From the terminal (manager included) that want to send the second video, press remote control ”Dual” key
4. Select the V.Input for the DualVideo and press “OK”
5. Press “YES” icon
Note
One other icon (camera or XGA) present in the status bar means active Dualvideo
System Diagnostics
The System’s diagnostics menu allows you to perform tests and checks to verify that the system is properly working.
From the Home Page select:
1. SETTINGS
2. DIAGNOSTICS
The following page will be displayed:
Terminal test
This option performs an internal test of the system.
The test can be useful to diagnose audio/video problems encountered during a call. The test uses encoded local audio and
video to simulate a connection. Press any keys to stop the test.
74
