CR-600 Instructions
page 5
Information subject to change.
97-8006668 - 01-26-2023
www.aetechron.com
Factory Service
If the unit fails to perform, it may need
to be returned for Factory Service. All
units under warranty will be serviced
free of charge (customer is responsi
-
ble for one-way shipping charges as
well as any custom fees, duties, and/
or taxes). Please review the Warranty
included with this Instruction Sheet for
more information.
All service units must be given Return
Authorization by AE Techron, Inc. be
-
fore being returned. Return Authoriza
-
tions can be requested on our website
or by contacting our Customer Service
Department.
Please take extra care when packag
-
ing your unit for repair. It should be
returned in its original packaging or a
suitable alternative. Replacement pack
-
aging materials can be purchased for a
nominal fee.
Please send all service units to the fol
-
lowing address and be sure to include
your Return Authorization Number on
the box.
AE Techron, Inc.
Attn: Service Department / RMA#
2507 Warren Street
Elkhart, IN 46516
Specifications
Performance Specifications
Coil Voltage:
24 VDC
Coil Current:
84 mA
Contact Rating:
30A
Typical Pulse Voltage:
>700 Vpp
Controls and Connectors
Amplifier Connections:
Dual binding posts
Radiating Loop:
Dual binding posts
Oscilloscope:
Dual turret connectors
Physical Characteristics
Case:
Injection-molded plastic
Operating Conditions,
Temperature:
10°C to 40°C (50°F to
104°F)
Humidity:
70% or less, non-condensing
Recommended Ambient Temperature:
25°C (77°F)
Cooling:
Natural air convection
Weight:
1.5 lbs. (0.68 kg)
Figure 3 – CR 600 Connectors
RADIATING
LOOP
OSCILLOSCOPE
CONNECTIONS
AMPLIFIER
CONNECTIONS
