Aesculap GD307, Service Manual

Page: 9 / 16

7
7.4 Assembling the handle part
¾
Insert from the rear the plunger with rear housing GD307227 into
handle part GD307201.
¾
Apply Loctite 572 on handle part GD307201 and tighten the screws
connecting the handle part to rear housing GD307227.
¾
To tack sheath GD307202, apply Uhu Plus “Schnellfest” on connecting
rod GD307210.
¾
Mount sheath GD307202 in its correct position on the plunger.
¾
Slide rocker complete GD307803 into the slot (with steel ball
TA003323 inserted), mount it on sheath GD307202 and swivel it in.
¾
Apply Loctite 572 on locknut GD307203 and screw locknut onto
handle part GD307201.
¾
Mount retaining ring TA007307.
¾
Mount sleeve GD307205.
¾
Screw in countersunk screw TA007306.
¾
Screw on fastening nut GD307207, secure with wire WS-111870080
(length: 7.5 mm) and spot-weld with a laser beam.
¾
Check for smooth running of the assembly.
This completes assembling of the handle part.
8. Postmaintenance
8.1 Function tests
¾
Clamp in the saw blade and test the micro-Line saggital saw with a
suitable drive unit (e.g., flexible shaft).
¾
Cautiously saw into a block of wood.
¾
Check the micro-Line saggital saw for atypical running noises which
would be a sign of defective bearings, gear wheels or connections.
¾
Check the micro-Line saggital saw for heat-up.
The temperature must not exceed 41 °C after 30 seconds of running.
8.2 Surface inspection
¾
Check the surface of the micro-Line saggital saw for sharp-edged
damage and residues.
9. Parts list
Art. no. Designation
GD307200 Plunger
GD307201 Handle part
GD307202 Sheath
GD307203 Locknut
GD307205 Sleeve
GD307207 Fastening nut
GD307210 Connecting rod
GD307211 Bearing
GD307212 Bearing
GD307213 Beveled pinion
GD307215 Spindle
GD307216 Pin
GD307217 Compression spring
GD307218 Connecting shaft
GD307219 Gear wheel
GD307221 Colored ring green
GD307222 Cone
GD307223 Shim
GD307224 Fastening shaft
GD307225 Bearing (x2)
GD307226 Special screw
GD307227 Rear housing
GD307228 Coupling piece
GD307229 Ring, end
GD307802 Drive unit, complete
GD307803 Rocker, complete
TA003323 Steel ball 2 mm NR
TA006311 Spiral pin DIN 7343 1.0 x 5 1430
TA007306 Countersunk screw DIN 936
M 1.6 x 3.0
TA007307 Retaining ring DIN 471 3.0 x 0.4
TA009541 Radial ball bearing 4 x 7 x 2 NR
TA009542 Radial ball bearing 2.5 x 5 x 1.5 NR