6
SETTINGS & ADJUSTMENTS
OPERATION
The Aerus Pure & Clean can be turned on or off, and adjusted, using the control panel on the front of the unit.
NOTE:
If you are operating your central heating and air conditioning fan or other ventilation system continuously, set
the coverage up to the total ventilated indoor area. Otherwise, set the coverage up to the size of the room.
To prevent injury, be sure the power cord is not accessible to small children.
1.
Take your Aerus
®
Pure & Clean unit out of the shipping carton
and remove all protective materials.
2.
Place your unit in an appropriate location which should be
four feet or higher from the ground. Never set it on the floor.
Place in a location away from the HVAC return duct. The rear
of the unit requires one inch or more of open area to allow
unrestricted airflow.
3.
Insert the Power Supply Plug into the power receptacle on
the rear of the unit. Plug the appropriate cord into the Power
Supply and into a working electrical outlet.
4.
Push the Power button once to turn the unit on.
5.
Push the A-PURE/A-PURE x2 button twice to set it to A-PURE
x2 level which will be illuminated on the screen.
6.
Push the Fan + button four times to reach the highest speed
(5th level).
•
A·PURE MODE:
The unit’s display shows the fan speed
(low to high) and A·PURE to indicate that the ActivePure
®
Cell and ionization are both functioning normally.
•
A·PURE x2 MODE:
A·PURE x2 lights up, indicates that
(2) ActivePure
®
Cells and ionization are both functioning
normally.
•
ION MODE:
Ion lights up, indicates only ionization
is functioning.
•
CLEAN:
Clean illuminates when cleaning is required.
•
RESET:
Clears the maintenance reminders after
performing routine maintenance.
•
CELL:
The Cell light will flicker when it is time to replace
your ActivePure
®
Cell.
For best results, run your Aerus Pure & Clean 24 hours a day,
7 days a week, giving you the benefits of ActivePure day and
night.
POWER
(STAND BY)
Turns the unit ON and OFF.
FAN UP/FAN DOWN
Adjusts the five speed fan.
A·PURE/A·PURE x2
Toggles the unit between A·PURE Mode
(ActivePure
®
and Ionization) and A·PURE x2 Mode
(2 ActivePure
®
Cells and Ionization).
REMINDER RESET
Clears the maintenance reminders after
performing routine maintenance.
x2
Power ON/OFF
Reminder Reset
Fan UP
Fan DOWN
A·PURE /
A·PURE x2
CAUTION
x2