Aerus LAUNDRY PRO, Owner'S Manual

Page: 10 / 32

10
BEFORE WASHING CLOTHES
IF YOUR WASHING MACHINE IS NOT NEW you will need to perform this
procedure to help remove any detergent buildup that may contaminate
your clothing.
1. Do not put clothes in the washer at this time.
Set your machine to its largest load setting, cold water only.
2. Start the washer and let it run through every cycle.
3. Once it has finished, repeat Steps 1 and 2 three more times.
Depending on the age and severity of detergent buildup,
it may be necessary to perform Step 3 several times.
NOTE:
If you have a front loading washer, odors can develop due to
stagnant water left inside. If musty odors develop it may be necessary
to run a commercially available cleaner made especially for front loading
washers to eliminate such odors.
CAUTION:
To avoid the possibility of water damage, should a hose leak, always have
faucets accessible and turn off faucets when washer is not in use.
IF YOUR WASHING MACHINE IS NEW , skip this section and
continue below.
BEFORE USING YOUR LAUNDRY PRO FOR THE FIRST TIME
USING YOUR LAUNDRY PRO
DETERGENT AND FABRIC SOFTENER
You may choose to continue to use detergent and/or fabric softeners if desired. However, to
completely experience all the benefits of your new Laundry Pro, we recommend washing using
nothing but cold water. NEVER apply detergent directly to dry clothes. Allow washer to fill, then add
detergent to prevent staining on clothes.
COLD HOT
NORMAL OPERATION
Using your Laundry Pro is as simple as turning on the washing machine.
Laundry Pro is designed to use the COLD/COLD setting of your washing machine.
HEAVY STAINS
For heavy stains, pre-treat area, apply pre-treater, rub gently and let stand for several minutes.
Wash as normal.