Page 7 of 36
AER.MIU.HWNEC.GB.01.04/14
SK2014-SON-002-TechMnl-SWC-001
A.3.
Dimensional Drawings
Dimensional drawing for HWN-25/30/40 -EC
(All dimensions shown in mm)
Information
B.
Service and Installation
B.1.
Installation of High-Wall Unit
B.1.1.
Selecting a Location
Select the location for the High-wall unit with the following considerations in mind:
1.
The front of the air inlet and outlet should be clear of any obstructions. The air should flow freely.
2.
The wall where the unit is to be mounted should be solid/firm enough not to resonate and produce noise.
3.
The location should allow easy access to install the connecting water pipes, and be where drainage can be
easily achieved.
4.
Ensure the clearance around the fan coil unit conforms to the following drawing.
5.
From the floor the height of the unit should be above eye level.
6.
Avoid installing the unit in direct sunlight.
*
Required clearance for maintenance and servicing is as shown above.
**
All dimensions shown in mm.
Higher than eye level
