Page 20 of 36
SK2014-SON-002-TechMnl-SWC-003
The system uses non-volatile memory to save the present operation parameters when system is turned off or
in case of system failure or cessation of power supply. Operation parameters when using a handset are Mode,
Set Temperature, Swing, and Fan Speed. When using a wall pad the parameters are Mode, Set Temperature,
Swing, and Fan Speed, as well as the 7-day ON/OFF Timer program. When power supply resumes or the system
is switched on again, the same operations as previously set will function.
C.1.11.
Operation Of Control Panel On High-Wall Unit
C.1.11.1.
On/Off Switch
a)
This is a tactile switch to select Cool→Heat→Off operation mode.
b)
In COOL mode, the set temperature of the system is 24ºC with auto fan speed and swing. There are no timer
and sleep modes.
c)
In HEAT mode, the set temperature of the system is 24ºC with auto fan speed and swing. There are no timer
and sleep modes.
d)
Master unit that does not use a wall pad will globally broadcast.
Note: When button pressing is effective, the master unit buzzer will beep twice and the slave unit will beep once.
