english
clean bag insertion
1 - Open the CLEAN BAG blocking system clamps that
are on the bottom of the dust container (d).
Check that the bag tensioner ring is fixed to the dust
container under the appropriate joints (e).
Check that the dust container gasket (f) is in the correct
position.
2 - Insert the CLEAN BAG in the dust container ensuring
that the blue disc (printed on the bottom of the bag) is
placed at the centre of the container.
The strips must be levelled with the handles.
NOTE
The dust bag must be inserted so that the strips enter
the slots (g) of the dust container handles.
Fold the CLEAN BAG under each clamp pair (1-2)
and close them one at the time ensuring that the
bottom of the bag is completely fitted inside the
blocking system.
3 - Fold the upper part of the bag inside the bag
tensioner ring (k). The CLEAN BAG must adhere to the
internal walls of the dust container.
Insert the strips into the handle slots (g) allowing them
to come out of the container.
NOTE
Only the strips of the dust container must come
out: any overhanging parts of the bag can create
anomalous noises and loss of air.
4 - Rehook the dust container and close the handles.
d
e
f
CLEAN BAG
1
2
g
g
k
User and maintenance manual
22
Maintenance
Maintenance
