AERPRO AERA10D
®
Radio Replacement Kit
for 2011-2018 Jeep Wrangler JK
AMHJP1K
Page 11
Step 6
Holding the mounting panel at the sides:
1. Position the bottom edge almost touching the air vents.
2. Firmly push the assembly against the dash panel.
3. Slide the assembly up until it snaps in place.
Note: Once the locking clips engage, the panel will
stay in place.
1
1
3
2
2
Step 5
To attach the display assembly, align
the location ribs on the sides of the
mounting panel to the side brackets
to center the panel side to side.
Part Three: Attaching the Display Panel (cont.)
Section 4: Radio Unit Installation (cont.)
Installer Note!
If you are having trouble locking the display
in place, try the tips below...
Confirm the four side mounting screws are flush
and not protruding beyond the thickness of the
plastic. (FIG A)
Press the display assembly
harder
against the
dash panel as you slide it into place.
(Step 6 / Part 2)
FIG A
