AERPRO AERA10D
®
Radio Replacement Kit
for 2011-2018 Jeep Wrangler JK
AMHJP1K
Page 10
Part Three: Attaching the Display Panel
Section 4: Radio Unit Installation (cont.)
Step 3
Step 4
Step 2
Step 1
Apply a piece of removable tape
across the bottom of the radio
opening to protect the dash panel
during installation.
Apply a piece of cloth tape across
the top and bottom edges of the
radio opening. Approximately 1/16”
of tape along the face of the dash
panel and the remainder folded
inward.
Connect the two display cables to
the back of the display.
Once the radio display is connected, and
before attaching the display panel, it is
recommended to power up the radio and
check functionality...
Volume, Balance, Fade
AM/FM Reception
Digital Radio Reception
Bluetooth
USB
Apple Carplay
Android Auto
Steering Wheel Controls
Camera(s)
1/16”
1/16”
